Water tightness of aluminum alloy doors and windows

commercial aluminum window manufacturers

The water tightness and air tightness of aluminum alloy doors and windows are the key to measuring quality. According to the summary of actual engineering experience, pay attention to the following ten points, aluminum alloy doors and windows will not leak air and water. Aluminum alloy doors and windows The doors and windows made of aluminum alloy extruded profiles as frames, stiles and fans are called aluminum alloy doors and windows, or aluminum doors and windows for short.

1: Since the general aluminum alloy doors and windows of enterprises are recessed, the top of the window must be a dripping beak to prevent the capillary phenomenon of rainwater from occurring.

2: Aluminum alloy doors and windows should be coated with waterproof coating about 300 mm away from the window, and lead water oil should be coated on the gray position before using the waterproof coating.

3: The windows must be sealed with concrete that has been added with waterproofing agent. Please note that waterproofing agent must be added.

4: Waterproof sealant should be applied to the transfer position around the window frame and other materials.

5: Fully open the top of the windows and add wall panels to prevent rainwater from flowing upwards into the room from the opening.

6: The glass aluminum frame is filled with sealing material, and the tape is not used.

7: The construction should strictly require the surrounding interfaces to be processed.

5 foot sliding closet doors

3068 exterior door french door opening size

aluminium commercial windows

bow window sizes and prices

How to choose a satisfactory aluminum window

 

superhouse aluminium windows

Aluminum alloy doors and windows are now in fierce market competition. A wide range of aluminum alloy doors and windows are dazzling. Sellers are also promoting increasingly complex methods and inexpensive products. But how to buy cost-effective-effective aluminum alloy doors and windows in the end?

1. Signs of aluminum alloy doors and windows

Manufacturers with formal or safe production and operation licenses shall indicate the marks of related products in obvious different parts of their research on aluminum alloy products.

2. Aluminum alloy for door and window sealing system performance

Expert aluminum doors and windows, there are door glass alloy choices, especially the design of insulating glass products, we must pay attention to its sealing performance. If the sealing is not good, it will cause the hollow layer to contain dirt and affect the appearance.

3. Aluminum alloy door and window components

The structural components of aluminum alloy doors and windows should be firmly connected, and different materials should be filled with corrosion-resistant materials to seal and waterproof the connected components.

4. Processing quality of aluminum alloy doors and windows

The high-quality aluminum alloy doors are finely processed and welded, especially the splicing parts are very flat.

5. Material of aluminum alloy doors and windows

Whether it is a broken bridge thermal insulation aluminum profile, the wall thickness of the main profile should be greater than 1.4mm; the color of the same aluminum alloy profile should be the same, if the color difference is obvious, it is not suitable for purchase;

vitally bifold door price

frameless folding stacking doors